The utility model discloses an electric bicycle fingerprint module, which consists of a sensor and an algorithm chip. The built-in anti-theft alarm device of the electric bicycle consists of a Bluetooth chip ble4.0, a buzzer chip, a vibration induction sensor, a RF radio frequency receiving and coding chip 315M/433M and a power conversion circuit. When users want to input fingerprints, they need to activate the Rf radio key button to activate the burglar alarm to enter a special authorized broadcasting. The broadcasting lasts for 30 seconds, waiting for the user app to pair with the Bluetooth of the alarm. This is a common Bluetooth matching mode. Only in the special authorized broadcasting mode, when the unauthorized mobile phone is connected, the mobile app will interact with the Bluetooth module with the key so that Let Bluetooth module record the information of the mobile app, the mobile app is authorized. After the authorization is successful and connected to the vehicle, the user enters the user's fingerprint through APP. The mobile app prompts the user to use the fingerprint to unlock and lock the electric vehicle after the successful entry, and the subsequent normal use does not need to be re-entered. Users can input multiple fingerprints or delete them. They can manage fingerprints through mobile app.
【技术实现步骤摘要】
电动自行车指纹模组
本技术属于属于指纹身份识别系统领域,具体是一种电动自行车指纹模组。
技术介绍
现有电动车主人身份识别的方式就是钥匙,用户使用车辆开锁、上锁时必须使用与车配套的钥匙。目前钥匙一般有两种,一种是使用物理方法的机械钥匙,将锁芯插入电动车锁孔拧动来开锁、上锁;一种是使用无线2.4G射频的遥控钥匙,靠近车辆一定范围内按下遥控钥匙的开锁、上锁按钮,电动车接收到遥控钥匙发射过来的开锁、上锁信号来自动开启或关闭电动车。这两种方法都是沿用了很多年的电动车开锁、上锁方法,随着行业各种技术的创新和发展,目前在安全性和使用体验方面已提现出了不足。传统的机械钥匙非常容易被破解,极易造成车辆被盗;无线射频方式的遥控钥匙稳定性不足,在日常使用上由于丢失和损坏会导致跟车辆配套的报警器无法使用,后期更换维修造成浪费。总而言之,以上两种传统方式在当前的使用环境下已有很多不足的地方,用户骑车必须带钥匙造成困扰,钥匙坏了或者丢了用户维修更换很麻烦,安全性方面也有待改善。
技术实现思路
本技术采用的技术方案是提供一种电动自行车指纹模组,具体技术方案为:智控主机用ble4.0芯片替换掉了原电动车内报警器的单片机芯片,并写入了智能电动车控制系统软件;指纹模组包括传感器+指纹芯片+指纹算法;配合手机APP、Rf射频遥控钥匙。车辆指纹模组和智控主机配套装入电动车里面,用户购买电动车使用只有车辆指纹的概念,使用车辆指纹用户需先Rf射频钥匙按钮激活防盗报警器进入一种特殊的授权广播,该广播持续30s,等待用户app和该报警器的蓝牙进行配对,这个是常用的蓝牙配对方式,只有在特殊授权广播的方式下,未授权 ...
【技术保护点】
1.一种电动自行车指纹模组,由指纹传感器和算法芯片组成,其特征在于:电动车内置防盗报警器由ble4.0蓝牙芯片,蜂鸣片,振动感应传感器,315M/433M的rf射频接收编码芯片以及电源转换电路构成;315M/433M的Rf射频钥匙是由一个编码发射芯片和纽扣电池构成,编码发射芯片输出的射频信号,由蓝牙报警防盗器的315M/433M的RF射频接收编码器转换,由蓝牙控制芯片的gpio读取解析,该内码为rf钥匙发射芯片的唯一编码,其中D0‑D3为按键的值。
【技术特征摘要】
1.一种电动自行车指纹模组,由指纹传感器和算法芯片组成,其特征在于:电动车内置防盗报警器由ble4.0蓝牙芯片,蜂鸣片,振动感应传感器,315M/433M的rf射频接收编码芯片以及电源转换电路构成;315M/433M的Rf射频钥匙是由一个编码发射芯片和纽扣电池构成,编码发射芯片输出的射频信号,由蓝...
【专利技术属性】
技术研发人员:谢杨,
申请(专利权)人:上海酷一信息科技有限公司,
类型:新型
国别省市:上海,31
还没有人留言评论。发表了对其他浏览者有用的留言会获得科技券。