The utility model discloses a new type of contact net connecting plate, the connecting plate comprises a plate body, the plate body, from top to bottom interval is provided with five connecting holes, respectively, a hole, two holes, four holes, five holes, three. With the structure, when in use, a hole, five hole through the insulator respectively mounted bearing cable and the contact line, three mount around the compensating pulley compensation line, two holes, four holes are respectively mounted rope protection. So, in two after compensation rope, rope to prevent catenary landing, increase the safety factor, but also to prevent the bearing cable and the contact line turn winding, to return to work repairing convenience, shorten the time, especially in the replacement of compensator can be connected by a connecting plate second, fourth hole with U ring with the tight line equipment, greatly increasing the safety of the operation, convenient adjustment of catenary cable sag and tension, improve the safety of construction workers, but also reduce the labor intensity, shorten the working time.
【技术实现步骤摘要】
新型接触网连接板一、
本技术属于接触网连接板
,具体涉及一种新型接触网连接板。二、
技术介绍
接触网是电气化铁道中主要供电装置之一,也是电气化线路的动脉,其功用是通过它与受电弓的直接接触,而将电能传送给电力机车。由于接触网位于铁路的上方,在重载使用的同时还要受到各种自然因素的影响,因此其故障率较高,而一旦接触网发生故障就会影响到行车安全。因此保证电气化线路安全稳定运行的关键要素之一就是保障牵引供电系统正常工作,其中安装环境复杂,长时间承受巨大的电力负荷和应力负荷的接触网更是维护电气化线路正常运行的重中之重。补偿器是接触网的重要部件,安装在锚段两端线索下锚处。该补偿器的作用是:当温度变化时,线索受温度变化的影响热胀冷缩出现伸长或缩短,在其坠砣重力的作用下,能够自动调整线索的张力并保持线索驰度满足技术要求,从而使接触悬挂的稳定性与弹性得到了改善,提高了接触网运营质量。该补偿器通常由补偿滑轮、补偿绳、连接杆、连接板、砣杆、坠砣组成。其中连接板是将补偿装置与接触网的承力索和接触线相连接的零件,作用是调节均衡承力索和接触线的驰度,并将防断补偿绳的保护绳挂在连接板上,起到防止补偿绳断后接触网接地的作用。现有的连接板是用Φ22铁筋制成的三角形结构,每一个角上设有一个圆环,其中后面的两个圆环经绝缘子挂载承力索及接触线,前面的一个圆环挂载补偿滑轮,一根保护绳挂在三角弓内。该种连接板由于接触网承力索与接触线张力需求,所以不能制成等边三角形,在补偿绳断后,会发生承力索与接触线翻转相互缠绕,加大抢修难度,在材质方面也纯在缺陷,易发生变形和开焊断裂,尤其是在在施工及日常维修时 ...
【技术保护点】
一种新型接触网连接板,包括板体(6),其特征是:在板体(6)上、从上至下间隔的设有五个连接孔,分别为一孔(1)、二孔(2)、三孔(3)、四孔(4)、五孔(5);一孔(1)的孔心与板体(6)上端边间距为25mm;五孔(5)与板体(6)下端边间距为25mm;二孔(2)与三孔(3)及四孔(4)与五孔(5)的孔心距均为100mm;一孔(1)与三孔(3)的孔心距为220mm;三孔(3)与四孔(4)的孔心距为280mm。
【技术特征摘要】
1.一种新型接触网连接板,包括板体(6),其特征是:在板体(6)上、从上至下间隔的设有五个连接孔,分别为一孔(1)、二孔(2)、三孔(3)、四孔(4)、五孔(5);一孔(1)的孔心与板体(6)上端边间距为25mm;五孔(5)与板体(6)下端边间距为25mm;二孔(2)与三孔(3)及四孔(4)与五孔(5)的孔心距均为100mm;一孔(1)与...
【专利技术属性】
技术研发人员:胡志强,王新伟,赵晓风,
申请(专利权)人:抚顺矿业集团有限责任公司运输部,
类型:新型
国别省市:辽宁,21
还没有人留言评论。发表了对其他浏览者有用的留言会获得科技券。