Determination of gas flow for six sulfur hexafluoride gas chromatography, gas flow is in the existing technology, in the sample before emptying, which set a one-way valve in the sample to ensure the evacuation port before the outside air does not affect the balance of the gas sample. In addition to the quantitative pipe in the air as soon as possible by the sample replacement clean, sample flow rate should be as large as possible, but the noise in the installation of one-way valve after sample flow over the general assembly, to solve the problem of setting a deadened resistance can be a one-way valve outlet. The utility model has the advantages of improved gas flow, which not only meets the quantitative tube gas sample volume, but also avoid the influence of air on the quantitative tube sample gas, to further improve the accuracy of the test result and work efficiency, and even different people to operate, but also to ensure the repeatability of test results.
【技术实现步骤摘要】
本技术涉及一种改进型的六氟化硫气相色谱测定法气路流程,主要用于电气设备六氟化硫气体中空气(N2、 02)、四氟化碳含量的测定。
技术介绍
国家标准GB/T 12002-2006《工业六氟化硫》中对于使用气相色谱法测定六氟化硫气体中空气和四氟化碳的方法时要求,"进样前用待测气体将连接管内气体置换干净,用定量管进样,待定量管中气体压力与大气压力平衡时,方能进入色谱柱,进样量小于2ml。"。现有技术的气路流程由样品进口、开关阀、定量管、六通阔、排空口、载气进口、色谱柱及热导检测器组成,样品排空口直接连接在六通阀上,但是在实际试验过程中因不同的搡作人员在平衡时的时间不一样,如果定量管压力和外界压力平衡时间过长会造成空气从排空口的渗透进入,而如果没有平衡就切换六通阀,会因定量管内的压力比外界压力高使样品进样量增加,这种不一致的操作方法不但影响结果的重复性,也会影响试验结果的准确性。而电力行业标准DL/T 920-2005《六氟化硫气体中空气、四氟化碳的气相色谱测定法》推荐的气路流程中并没有保证国标中这项要求的措施。
技术实现思路
本技术要解决的技术问题是提供一种改进的六氟化硫气相色谱测定法气路流程,适用本气路流程不但可保证样品进样量和搡作方法的一致,而且也可避免外界空气对样品结果的影响。解决本技术问题所采用的技术方案是在现有技术的气路流程中,在样品排空之前,即在样品排空口前设置一个单向阀,以保证外界空气不至于影响到平衡后的样品气。另外为使定量管中的空气尽快被样品置换干净,样品的流速应越大越好,但在加装单向阀后样品流量过大会产生啸叫声,在单向阀出口设置一个消音气阻即可解 ...
【技术保护点】
六氟化硫气相色谱测定法气路,它由样品进口(12)、开关阀(13)、定量管(14)、六通阀(11)、排空口(8)、载气进口(1)、色谱柱(6)及热导检测器组成,样品排空口(8)直接连接在六通阀(11)上,其特征在于:在样品排空口(8)前设置一个单向阀(10)。
【技术特征摘要】
【专利技术属性】
技术研发人员:王允志,王允彬,
申请(专利权)人:河南省中分仪器有限公司,
类型:实用新型
国别省市:41[中国|河南]
还没有人留言评论。发表了对其他浏览者有用的留言会获得科技券。