The utility model discloses a multi point riveting mechanism for cylindrical products, including cylinder, connection shaft, swing rod, cam disc, step shaft, arc groove, guide block, and product groove. Its characteristic is that the cam disc is set at the bottom of the whole structure, the pendulum is located in the cylinder and the two are connected together by the connecting shaft, and the swing rod is another. The end is connected with the arc groove, and the step shaft crosses the whole arc groove and the middle is below the groove of the product. The guide block is located on the left and right sides of the grooves of the product. The product is placed in the groove of the product. The swing rod is driven forward and backward through the cylinder to drive the cam disc to revolve around the center, and at the same time, the force increasing mechanism of the pendulum rod is used. The cylinder force can be reduced by reducing the cylinder force, and the step shaft will slide in the arc groove to drive the rivet to slide back and forth between the two guiding blocks to realize the riveting and withdrawal of the product. The utility model can use a cylinder to riveting a number of riveting heads to save cost and improve efficiency.
【技术实现步骤摘要】
圆柱产品多点铆接机构
本技术涉及机械铆接领域,具体为圆柱产品多点铆接机构。
技术介绍
铆接机构是依据冷辗原理研制而成的一种新型铆接设备,就是指能用铆钉把物品铆接起来机械装备。该设备结构紧凑、性能稳定、操作方便安全。铆接机主要靠旋转与压力完成装配,主要应用于需铆钉(中空铆钉、空心铆钉、实心铆钉等)铆合之场合,常见的有气动、油压和电动,单头及双头等规格型号,而常见的类型主要有自动铆钉机和旋铆机。多点铆接机构,就是利用铆杆对铆钉局部加压,并绕中心连续摆动直到铆钉成形的铆接方法。按照这种铆接法的冷碾轨迹,可将其分为摆碾铆接法和径向铆接法。摆碾铆接法就是铆头对工件首先进行点接触边通过气缸或液压缸对工件表面加压同时进行全方位的辗压,使工件表面瞬时变形而产生铆合的效果。而径向铆接法则是对中心点加压然后使金属向四周变形碾压。就两种铆接法比较而言,径向铆接对工件表面变形时的压力要求比摆辗式铆接要大,同时它的正负球面由于直接受压,所以易损,故障率高,经过我们多年的实践,此方法已渐渐被摆辗式所代替,而且它的加工工件的质量外观不如摆辗式的好,同时它的故障率高,所以客户都选择了摆辗式的旋铆机。在旋铆工件时,摆辗式的稳定性能好,工件不会出现径向式的抖动,而影响加工质量.特别是在圆弧形铆合时,使用摆辗式铆合时,工件基本上不用手去接触工件,便能完成铆合工作。在机械铆接的生产中,目前还没有一种便于加工的圆柱产品多点铆接机构。
技术实现思路
本技术正是针对以上问题,提供一种便于加工的圆柱产品多点铆接机构。本技术通过以下技术方案来实现上述目的:圆柱产品多点铆接机构,包括气缸、连接轴、摆杆、凸轮圆盘、台 ...
【技术保护点】
1.圆柱产品多点铆接机构,包括气缸、连接轴、摆杆、凸轮圆盘、台阶轴、弧形槽、导向块、产品凹槽,其特征在于凸轮圆盘设置在整个结构的最下方,摆杆位于气缸内并由连接轴把二者连接在一起,摆杆另一端与弧形槽相连,而台阶轴横穿整个弧形槽并且中部在产品凹槽正下方,导向块位于产品凹槽的左右两侧。
【技术特征摘要】
1.圆柱产品多点铆接机构,包括气缸、连接轴、摆杆、凸轮圆盘、台阶轴、弧形槽、导向块、产品凹槽,其特征在于凸轮圆盘设置在整个结构的最下方,摆杆位于气缸内并由连接轴把二者连接在一起,摆杆另一端与弧形槽相连,而台阶轴横穿整个弧形槽并且中部在产品凹槽正下方,导...
【专利技术属性】
技术研发人员:张建江,孙少毅,孙祥,辛瑞,张建维,辛明辉,宋利兵,
申请(专利权)人:苏州欧康信智能装备有限公司,
类型:新型
国别省市:江苏,32
还没有人留言评论。发表了对其他浏览者有用的留言会获得科技券。