The invention discloses a method for processing a mahogany cold crack, which aims to provide a wood can improve and eliminate or reduce the intensity of cold cracking and crack deformation processing method, the technical proposal is: according to the trunk appearance bibulous rate is more than internal and closer looks more easy to crack the principle, the first wood placed in water soaked or boiled or soaked and boiled, both as a first step, adding preservative sodium chloride in water, adding amount of visual material, is generally 0.01 - 0.2, then the effluent was dried, according to the structure of the wood is used to determine the differences and whether acute selection as the two drying methods the sequence, because of low density and is easy to crack and require fast selection of artificial drying in indoor baking or drying, anti selection of natural drying. The treated wood not only can improve the cold resistance and deformation resistance, but also can eliminate or reduce the crack.
【技术实现步骤摘要】
红木抗寒防裂处理方法
本专利技术涉及木材的处理方法,持别涉及经过处理加工后的红木可提高材质而达到适用范围更广和使用率更高及更为耐用的一种方法。
技术介绍
众所周知,木材用途很广,比如用来修建房屋、制做家具和某些器具中的配件等,由于木材是从山中砍伐而来而含有大量的水份,最多可达其重量的0.5以上,因此干燥后必然会出现体积收缩变小和重量减轻,并依据材质的不同和环境的差异在干燥过程中常常出现变形和开裂,严重时会成为废品而造成浪费,其原由是木材的自然干燥周期较长,少则几天、多则数月,在此过程中要经过多次重复升温和降温,露天干燥其外表各部位受太阳照射程度不一,同一部位时有时无、时強时弱,晴天水份减少,雨天水份增加;室內干燥其温度和空气流速也是多变的。
技术实现思路
本专利技术为克服上述不足,旨在提供一种可提高木材抗寒力度和杜绝开裂或减少裂纹和变形的处理方法,采用以下技术方案予以实现。依据树干外表吸水率多于内部和越接近外表越易开裂的原理,先将木材放置于水中浸泡或煮沸,或既浸泡又煮沸做为笫一道工序,并在水中加入防腐剂——氯化钠,加入量视材质而定,一般为0.01——0.2,过多无防,但会造成浪费,为降低成本可选用工业用盐。再将其出水进行干燥,依据木材其结构的差异和是否急用来决定选择干燥方式做为笫二道工序,即因密度较低而易于开裂并要求快速的选择人工干燥——置于室内烘烤或风干(引风机),反则选用自然干燥。只要处在浸泡或煮沸中的木材能吸收一定的水份,其氯化纳也随之入内,因为氯化纳易溶于水,在干燥过程中其水份被蒸发,氯化纳被留在木材中,由此起到了增加木材的密度即重量有所增加,为增強抗 ...
【技术保护点】
一种红木抗寒防裂处理方法,其特征是在干燥过程中增加一道工序:将木材放置于水中浸泡或煮沸,或既浸泡又煮沸,并在水中加入防腐剂——氯化钠。
【技术特征摘要】
1.一种红木抗寒防裂处理方法,其特征是在干燥过程中增加一道工序:将木材放置于水中浸泡或煮沸,或既浸泡又煮沸,并在水中加入防腐剂...
还没有人留言评论。发表了对其他浏览者有用的留言会获得科技券。