The invention discloses a method for controlling the lance position of oxygen lance for converter slagging and steelmaking with limestone. In the process of converter steelmaking, limestone is added directly instead of traditional lime for slagging, limestone is added directly during the silica-manganese oxidation period, and limestone is added in 1_3 times; under the premise of maintaining the flow rate of oxygen lance, the oxygen lance is blown in the early stage of blowing. The position of oxygen lance is lowered to the high lance position in the late stage of lime slagging and steelmaking; the lance position is maintained in the middle stage of blowing to improve the slag drying state during decarbonization; the low lance position is adopted in the late stage of blowing; and the lance position is lowered to the lowest level near the end of blowing. The oxygen lance position of the invention adopts the mode of high high low to control, which not only reduces the probability of leakage of the oxygen lance at the initial stage of smelting, but also reduces the probability of slag drying back, oxygen lance sticking cold steel and oxygen lance leaking at the middle stage of smelting, and reduces the slag formation at the furnace mouth, adopts the low lance position at the later stage, appropriately reduces the oxidation of slag, and improves the dephosphorization. The efficiency reduces the free oxygen of stop blowing.
【技术实现步骤摘要】
一种转炉用石灰石造渣炼钢氧枪枪位控制的方法
本专利技术属于炼钢生产
,尤其涉及的是一种转炉用石灰石造渣炼钢氧枪枪位控制的方法。
技术介绍
氧枪枪位是指在转炉冶炼过程中,从氧枪喷嘴到熔池平静液面的垂直距离,一般称氧枪喷头距熔池液面高度,即冶炼枪位。氧枪枪位是炼钢造渣过程的主要控制量,合理的枪位操作对于降低喷溅、炉渣返干的发生频率,提高钢的质量都具有重要意义。根据转炉熔体成分和温度的变化,转炉吹炼过程可以分为三个时期:吹炼前期(硅锰氧化期)、吹炼中期(碳氧化期)、吹炼后期(碳氧化后期),自石灰造渣炼钢方法问世后,为减少喷溅、返干概率,完成脱磷脱碳的目的,转炉氧枪枪位根据吹炼阶段进行控制,一般枪位都是高-低-高的模式,在吹炼前期采用高枪位吹炼,提高渣中FetOX,促进石灰的溶解,形成具有碱度高、氧化性高的熔渣,达到前期快速脱磷的目的。由于渣中氧化性很高,在吹炼中期,碳氧激烈反应,快速产生大量的CO气体,为了避免炉渣喷溅,需要降低枪位,采用低枪位吹炼,从而降低渣中氧化性,达到预防喷溅的目的。现场操作已经确认,如果在中期采用高枪位吹炼,极容易产生喷溅,影响生产过程。在转炉吹炼过程中,为了获得平稳快速的冶炼反应效果,需要确保氧气射流对金属熔池产生一定的冲击深度h和搅拌强度,要求氧气流股的冲击深度与熔池深度h熔池比要小于一定的比值,单孔喷枪h/h熔池≤0.4~0.7,多孔喷枪h/h熔池≤0.2~0.7而操作上则根据经验公式H=(36-55)d喉,枪位在H值得范围内变化(H:喷头距熔池液面的高度,mm;d喉:氧枪喷头喉口直径,mm)。石灰石替代石灰造渣炼钢枪位控制方 ...
【技术保护点】
1.一种转炉用石灰石造渣炼钢氧枪枪位控制的方法,其特征在于,在转炉炼钢过程中,直接加入石灰石代替传统的石灰造渣,在硅锰氧化期直接加入石灰石造渣,石灰石分1‑3次加入;保持氧枪流量的前提下,在吹炼前期,一开吹就把氧枪位置下降到石灰造渣炼钢后期的高枪位吹氧;在吹炼中期,继续维持这个枪位,改善脱碳期炉渣返干状态;在吹炼后期,采用低枪位控制,适当降低渣中FeOx含量,较强熔池搅拌;接近吹炼终点时,将枪位降低到最低;吹炼前期、中期、后期的枪位在H=(36‑55)d喉范围内,式中:H为喷头距熔池液面的高度,单位为mm;d喉:氧枪喷头喉口直径,H和d喉单位为mm。
【技术特征摘要】
1.一种转炉用石灰石造渣炼钢氧枪枪位控制的方法,其特征在于,在转炉炼钢过程中,直接加入石灰石代替传统的石灰造渣,在硅锰氧化期直接加入石灰石造渣,石灰石分1-3次加入;保持氧枪流量的前提下,在吹炼前期,一开吹就把氧枪位置下降到石灰造渣炼钢后期的高枪位吹氧;在吹炼中期,继续维持这个枪位,改善脱碳期炉渣返干状态;在吹炼后期,采用低枪位控制,适当降低渣中FeOx含量,较强熔池搅拌;接近吹炼终点时...
【专利技术属性】
技术研发人员:吴政,李洪涛,潘永飞,兰天,
申请(专利权)人:宝钢湛江钢铁有限公司,
类型:发明
国别省市:广东,44
还没有人留言评论。发表了对其他浏览者有用的留言会获得科技券。