A continuous heat storage heat exchanger consists of a valve stem module, a shell, a central shaft, a regenerator, a speed control motor, a control box and a cam control device. The cylindrical regenerator is divided into 9 sectors that are not connected to each other. The rotating cam below controls the rise and decline of the stem components. The valve opens and closes; the high temperature flue gas (A+) enters the regenerator from the valve hole at the upper part of the valve stem component, which is heated to a low temperature flue gas (A) after heating the regenerator and enters the ring cavity through the lower valve hole; the cryogenic air (B) enters the regenerator from the valve hole at the top of the valve stem group, and the regenerator is heated to the air. The hot air (B+) is derived from the upper ring cavity through the upper valve hole; the control box (6) controls the opening frequency of the reversing valve by controlling the speed of the motor and adjusts the pressure of the spring to the cone by adjusting the position of the retaining ring to adjust the seal of the control valve, and the part of the valve rod (1) (1) is fitted with a sealing ring with the hole on the shell. Leak.
【技术实现步骤摘要】
一种连续型蓄热式换热器
本技术涉及到环境保护
,特别涉及到余热利用
技术介绍
随着工业化进程加速,人们通过消耗越来越多的原材料和能源,来满足生产和生活需要,人类所赖以生存的环境正在被破坏,保护环境、节约能源已经成为人们最紧迫的课题:人们已在多个领域使用AB型蓄热式换热器来回收余热,AB型蓄热燃烧技术存在以下不足:(1)蓄热室与燃烧器必须成对配置;(2)蓄热室在换向时,存在容积效应,造成了能量和燃料的浪费;(3)换向阀在蓄热系统对于空气和烟气换向的同时,燃烧系统也进行换向,增加了不安全的因素;(4)由于频繁的换向引起燃烧波动,引起压力场波动;最近,人们又研发了一种旋转型蓄热器来替代AB型换热器,该蓄热器固定烟气、空气的进气方向,通过旋转蓄热体,解决了烟气空气的不连续性;但由于蓄热体自重较大,转子的外缘的挠度大,尤其因在工作状态下的冷热端温差而呈蘑菇形,使转子外缘的间隙增大而造成漏气,缩短了使用寿命;为了克服上述设备的缺点,我们研发了一种连续型蓄热式换热器,不仅将余热充分利用,而且使设备的寿命和可靠性大大提高。
技术实现思路
本技术一种连续型蓄热式换热器,最大的特点是蓄热体本身不旋转,蓄热体四周壳体孔中安装有阀杆组件,阀杆组件上、下各装有2组4件锥体,用挡圈调整位置,用弹簧调整压力,壳体中有4块钢板有均匀分布的锥孔,壳体钢板上的锥孔与阀杆组件上的锥体配合,形成换向阀,通过旋转凸轮推动阀杆组件作周期性的升降,起到了时序换向阀的作用,达到旋转换热的目的,设备运行时稳定性好,并解决了旋转型蓄热器漏气问题。一种连续型蓄热式换热器是由阀杆组件、壳体、中心轴、 ...
【技术保护点】
1.一种连续型蓄热式换热器,是由阀杆组件、壳体、中心轴、蓄热体、调速电机、控制箱、凸轮控制装置组成,其特征在于蓄热体四周壳体孔中安装有阀杆组件,阀杆组件上、下各装有2组4件锥体,用挡圈调整位置,用弹簧调整压力,壳体中有4块钢板有均匀分布的锥孔,壳体钢板上的锥孔与阀杆组件上的锥体配合,形成换向阀,通过旋转凸轮推动阀杆组件作周期性的升降,圆柱形的蓄热体被隔板均匀分隔成互不相通9个扇形区,阀杆组件下面的滚珠在凸轮平面滚动,控制阀门的开启和关闭,控制箱通过控制电机的转速来控制换向阀的开启频率,阀杆与壳体上孔配合的部分装有密封圈防泄漏。
【技术特征摘要】
1.一种连续型蓄热式换热器,是由阀杆组件、壳体、中心轴、蓄热体、调速电机、控制箱、凸轮控制装置组成,其特征在于蓄热体四周壳体孔中安装有阀杆组件,阀杆组件上、下各装有2组4件锥体,用挡圈调整位置,用弹簧调整压力,壳体中有4块钢板有均匀分布的锥孔,壳体钢板上的锥孔与阀杆...
还没有人留言评论。发表了对其他浏览者有用的留言会获得科技券。