The new combustion chamber kettle structure is made up of a pot lid, a handle, a pot body and a waste gas ring pipe (serial number 4), a hot gas pipe (serial number 5), a combustion chamber (serial number 6), a heat collecting tube (serial number 7), an exhaust gas regulating plate (serial number 8), an exhaust pipe (serial number 9), and a silicone hose (serial number 12). At the bottom of the pot designed combustion chamber, the combustion tube cavity by direct flame heating, the water in the tube and the water in the kettle is communicated with the convection, gas and air mixture combustion, is not affected by the wind and current, stable combustion, hot gas duct is communicated with the exhaust pipe are arranged in the pot, pot of water. The waste heat is fully utilized, the heat is not overflowing, and the fire is not seen. The flue gas is discharged by the waste trachea after the pot and is purify the environment, which is favorable for health. The application of the combustion chamber makes the heat of gas and the waste heat of the flue gas well applied. Its structural design is scientific and innovative, making a new type of combustor water pot. The advanced kitchen utensils are safe, practical, energy saving and environmental protection.
【技术实现步骤摘要】
新型燃烧腔水壶
:厨具,烧水的水壶。
技术介绍
:烧水壶为传统的结构形状,现代均为不锈钢水壶,其结构为壶体(壶体上有壶嘴),壶盖,提手组成,因其形体造成:1、热量外溢,热损失大。2、燃气和空气混合不好,燃烧不充分,燃气不能充分利用。3、风力和气流均能影响燃烧稳定性。4、使用时有明火,存在安全隐患。5、燃烧产生的烟气不能很好排出室外,影响健康,污染环境。
技术实现思路
:新型燃烧腔水壶,改变了传统水壶的结构,在壶底部设计了燃烧腔(序号6),燃烧腔(序号6)内集热管(序号7)中的水与壶内水相通,参于壶中的热交换对流,提高加热速度。燃烧的热气流烟气,经热气导管(序号5)进入废气环管(序号4),废气管(序号9),废气通过快速接头(序号10),硅胶软管(序号12)与抽烟机接口相连,被抽烟机排出室外。燃烧产生的热气流烟气经热气导管(序号5),废气环管(序号4),从壶内经过排出,烟气的余热有效的利用,由单一的壶外加热方式,改成壶外加热方式,和壶内加热方式的复合加热形式,燃烧腔的运用实现了复合加热。燃烧在燃烧腔内进行,燃气和空气混合好,燃烧温度高,燃烧稳定,节省燃气,燃烧状态不受风力和气流的影响,使用过程不见明火,不存安全隐患,烟气能直排室外,洁化环境,有利健康。新型燃烧腔水壶,热工性能好,结构合理,应用性能有了很大的改善和提高,具有科学性,安全性实用性,节能又环保的新型水壶。附图说明:新型燃烧腔水壶,由废气环管(序号4),燃气导管(序号5),燃烧腔(序号6),集热管(序号7),废气调节板(序号8),废气管(序号9),硅胶软管(序号12),快速接头(序号10),等组成,其结构 ...
【技术保护点】
新型燃烧腔水壶,在壶底部设计了燃烧腔(序号6),燃烧腔(序号6)内集热管(序号7)中的水与壶中水相通,参于壶中水的对流。燃烧的热气流经热气导管(序号5)进入废气环管(序号4)和废气管(序号9),烟气通过快速接头(序号10)硅胶软管(序号12)与抽烟机接口相连,被抽烟机直接排出室外。加热方式:由外热式改成外热式和内热式复合的加热方式,燃烧腔(序号6)运用,实现了复合加热方式。具有节能,环保,安全其技术特性。技术创先特点:一、燃烧腔的结构创意,其集热管的水与壶中的水相通参于热交换对流。二、燃烧热气流由热气导管(序号5)引入壶中,和壶中的废气环管(序号4)相通余热得到利用。三、由上述一、二的结构,实现的复合的加热方式。四、废气管(序号9)和废气调节板(序号8)组成,给烟气直排至室外创造条件。
【技术特征摘要】
1.新型燃烧腔水壶,在壶底部设计了燃烧腔(序号6),燃烧腔(序号6)内集热管(序号7)中的水与壶中水相通,参于壶中水的对流。燃烧的热气流经热气导管(序号5)进入废气环管(序号4)和废气管(序号9),烟气通过快速接头(序号10)硅胶软管(序号12)与抽烟机接口相连,被抽烟机直接排出室外。加热方式:由外热式改成外热式和内热式复合的加热方式,燃烧腔(序...
还没有人留言评论。发表了对其他浏览者有用的留言会获得科技券。