Dust concentration sensor circuit of a coal mine dust detection, relates to the technical field of electronic information, including for collecting dust gas sensing probe, the probe by the photomultiplier tube is connected to the photoelectric integrated circuit, the integrated circuit by photoelectric conversion circuit connected to the frequency signal output circuit and display circuit, photomultiplier tube the signal sensing probe into an optical signal by optical current integral circuit converts and scattered light is proportional to the electric signal, the electric signal through the conversion circuit is transformed into frequency signal output at the same time, the concentration of dust were obtained for display, the sensor circuit also includes intrinsically safe power supply, the power supply safety the high voltage generating circuit connected by 5VDC voltage regulator circuit, the high-voltage generating circuit is connected to the photomultiplier tube and optical integrator for the current Supply power. The utility model can be suitable for the harsh environment in the coal mine, the integrated circuit module is reasonable in design, stable in operation, and has high sensitivity.
【技术实现步骤摘要】
本技术涉及电子信息
,具体涉及一种煤矿粉尘检测用粉尘浓度传感器电路。
技术介绍
煤炭是我国的主要能源,在国民经济能源结构中占据很重要的位置,在我国一次能源消费中占76%以上。随着国民经济的快速发展,煤炭的需求量越来越大,近几年,原煤产量增长迅速,仅2007年全国原煤产量就超过了 20亿吨。随着生产规模的扩大,煤尘污染情况也越来越严重。煤尘属于粉尘,产生于煤炭的开采、堆存、运输以及加工利用等环节,构成作业场所气相因子的主要污染源之一。就煤矿行业而言,在煤炭生产过程中,几乎所有的作业均可产生粉尘。随着煤炭生产机械化程度的加大和采煤强度的不断提高,凿岩、爆破、装卸、破碎、运输等各个作业段的煤尘产生量在大量增加。在无防尘措施的情况下,炮采工作面的粉尘浓度可达到300-500mg/m3,机采工作面的粉尘浓度可达到1000-3000mg/m3,综采工作面的粉尘浓度可达到4000-8000mg/m3。严重污染作业场所的环境,危害职工身体健康,影响安全生产。在我国,尘肺病是主要职业病之一。随着近年来改革开放步伐的加快,经济的迅猛发展,社会对能源和工矿产品需求的增大,粉尘灾害产生的影响正在逐步扩大。且煤尘具有爆炸性,悬浮于空中并达到一定浓度,这时如果有一个能引燃煤尘的热源就会发生煤尘爆炸。煤尘爆炸会发生诸如煤矿特大瓦斯爆炸一样的恶性事故。对于煤矿而言,煤尘爆炸的后果比瓦斯爆炸更严重,前者将产生大量的窒息性气体二氧化碳和有毒性气体一氧化碳,造成矿工中毒或死亡;后者主要产生水蒸气和二氧化碳气体。因此对于煤矿粉尘的监测显得尤为重要,特别对于检测用的传感器要求较高。
技术实现思路
...
【技术保护点】
一种煤矿粉尘检测用粉尘浓度传感器电路,其特征在于:包括用于采集含尘气体的传感探头,所述的传感探头经光电倍增管连接到光电积分电路,所述的光电积分电路经转换电路连接到频率信号输出电路和显示电路,光电倍增管将传感探头的信号转换成光信号,再经光电流积分电路转换成与散射光成正比的电信号,此电信号再通过转换电路变换为频率为200?1000Hz的频率信号进行输出,同时经计算后得出粉尘的质量浓度进行显示,传感器电路还包括本安电源,所述的本安电源经5VDC稳压电路连接高压发生电路,所述的高压发生电路连接到光电倍增管及光电流积分电路为其提供电源。
【技术特征摘要】
还没有人留言评论。发表了对其他浏览者有用的留言会获得科技券。