The invention discloses a contact oxidation process in wastewater treatment, hydrolysis acidification tank effluent stream to the north and south sides of gravity two contact oxidation pond, by adjusting the contact oxidation tank inlet valve two water intake system is basically the same; open the blower two, adjusting the contact oxidation pond aeration regulating valve, the the aeration pool is roughly the same size, uniform aeration; each contact oxidation system of No. 1 pool for the first into the pool of high load. 1, after the pool of biochemical wastewater treatment into 2 pools, so no. 2 tank load. Through the analysis of small organic load aeration pool of regulation No. 1 more than 2 pool, can also be adjusted according to the data analysis of dissolved oxygen meter; if there is no local aeration effect or aeration may be small, the aerator aeration pipe water filled with debris, which can be opened The exhaust valve of the exhaust pipe will discharge the sewage from the underwater aeration pipe. The process is simple and efficient, and the cycle is shortened.
【技术实现步骤摘要】
一种在污水处理中的接触氧化工艺
本专利技术涉及一种工艺,尤其是涉及一种在污水处理中的接触氧化工艺。
技术介绍
污水,通常指受一定污染的、来自生活和生产的排出水。污水主要有生活污水、工业废水和初期雨水。污水的主要污染物有病原体污染物、耗氧污染物、植物营养物和有毒污染物等。根据污水来源的观点,污水可以定义为从住宅、机关、商业或者工业区排放的与地下水、地表水、暴风雪等混合的携带有废物的液体或者水。污水由许多类别,相应地减少污水对环境的影响也有许多技术和工艺。按照污水来源,污水可以分为这四类。第一类:工业废水来自制造采矿和工业生产活动的污水,包括来自与工业或者商业储藏、加工的径流活渗沥液,以及其它不是生活污水的废水。第二类:生活污水来自住宅、写字楼、机关或相类似的污水;卫生污水;下水道污水,包括下水道系统中生活污水中混合的工业废水。第三类:商业污水来自商业设施而且某些成分超过生活污水的无毒、无害的污水。如餐饮污水。洗衣房污水、动物饲养污水,发廊产生的污水等。第四类:表面径流来自雨水、雪水、高速公路下水,来自城市和工业地区的水等等,表面径流没有渗进土壤,沿街道和陆地进入地下水。人类生产活动造成的水体污染中,工业引起的水体污染最严重。如工业废水,它含污染物多,成分复杂,不仅在水中不易净化,而且处理也比较困难。工业废水,是工业污染引起水体污染的最重要的原因。它占工业排出的污染物的大部分。工业废水所含的污染物因工厂种类不同而千差万别,即使是同类工厂,生产过程不同,其所含污染物的质和量也不一样。工业除了排出的废水直接注入水体引起污染外,固体废物和废气也会污染水体。农业污染首 ...
【技术保护点】
一种在污水处理中的接触氧化工艺,其特征在于,包括以下步骤:(1)水解酸化池出水重力流流到南北两侧两个接触氧化池,通过调节接触氧化池进水阀门使两个系统进水量基本相同;(2)开启罗茨风机两台,调节接触氧化池上曝气量调节阀门,使各个池内曝气量大小基本相同,曝气均匀,本曝气系统采用鼓风机供气、池底曝气头释放;(3)每个接触氧化系统1号池为第一个进水池负荷略高,1号池生化处理过后废水流入2号池,所以2号池内负荷略小,通过对有机物负荷分析1号池内曝气量调节要略大于2号池,也可通过对溶解氧仪数据的分析进行相应的调整;(4)如有局部曝气无效果或曝气量微小,可能为曝气头曝气管内进水充满杂物,可开启排空管排污阀门将水下曝气管道内污水排出即可。
【技术特征摘要】
1.一种在污水处理中的接触氧化工艺,其特征在于,包括以下步骤:(1)水解酸化池出水重力流流到南北两侧两个接触氧化池,通过调节接触氧化池进水阀门使两个系统进水量基本相同;(2)开启罗茨风机两台,调节接触氧化池上曝气量调节阀门,使各个池内曝气量大小基本相同,曝气均匀,本曝气系统采用鼓风机供气、池底曝气头释放;(3)每个...
还没有人留言评论。发表了对其他浏览者有用的留言会获得科技券。