The invention discloses a hydrolysis acidification process, ozone catalytic reactor effluent into the hydrolysis acidification tank with gravity or DSM water pressure flow directly into the hydrolysis acidification with water tank, adjust water inlet valve into the seat with two of the water tank is basically the same; adjusting each solution acidification pool aeration regulating valve regulating the aeration volume size the same uniform water and aeration; hydrolysis acidification tank effluent through the weir inflow mixing tank, mixing tank water through the diversion tunnel and the water flow into the neutralization pond, diffuse through the glass steel partition spilling over into coagulation tank, open at the same time coagulation mixer coagulation; sludge bed zone and water separation packing layer hydrolysis acidification pool, to be sewage treatment and residual microbial membrane filter backwash falling off from the bottom of the reactor into the pool; biofilm shedding to regular sampling in the laboratory microscope Microscopically, microscopic examination was performed to observe and analyze the growth and reproduction of microbes. The process is simple, high efficiency and low cost.
【技术实现步骤摘要】
一种水解酸化操作工艺
本专利技术涉及一种工艺,尤其是涉及一种水解酸化操作工艺。
技术介绍
污水,通常指受一定污染的、来自生活和生产的排出水。污水主要有生活污水、工业废水和初期雨水。污水的主要污染物有病原体污染物、耗氧污染物、植物营养物和有毒污染物等。根据污水来源的观点,污水可以定义为从住宅、机关、商业或者工业区排放的与地下水、地表水、暴风雪等混合的携带有废物的液体或者水。污水由许多类别,相应地减少污水对环境的影响也有许多技术和工艺。按照污水来源,污水可以分为这四类。第一类:工业废水来自制造采矿和工业生产活动的污水,包括来自与工业或者商业储藏、加工的径流活渗沥液,以及其它不是生活污水的废水。第二类:生活污水来自住宅、写字楼、机关或相类似的污水;卫生污水;下水道污水,包括下水道系统中生活污水中混合的工业废水。第三类:商业污水来自商业设施而且某些成分超过生活污水的无毒、无害的污水。如餐饮污水。洗衣房污水、动物饲养污水,发廊产生的污水等。第四类:表面径流来自雨水、雪水、高速公路下水,来自城市和工业地区的水等等,表面径流没有渗进土壤,沿街道和陆地进入地下水。人类生产活动造成 ...
【技术保护点】
一种水解酸化操作工艺,其特征在于,包括以下步骤:(1)臭氧催化反应器出水重力流入水解酸化配水箱或DSM来水压力流直接进入水解酸化配水箱,打开进水管道、出水管道阀门,调节配水箱进水阀使进入两座配水箱的水量基本相同,配水管出水均匀;(2)待水位淹没填料层污泥床后,开启罗茨鼓风机进行曝气,调节每组解酸化池曝气调节阀门调控其曝气量大小基本相同且曝气水均匀,溶解氧量0.5——1之间;(3)水解酸化池出水通过出水堰流入混合池,混合池内水通过导流洞流入中和池,投加氢氧化钠调PH中性,中和池水漫过玻璃钢隔断溢流入混凝池,同时开启混凝搅拌机加药混凝;混凝后通过管道水流入水力澄清池,澄清沉淀后 ...
【技术特征摘要】
1.一种水解酸化操作工艺,其特征在于,包括以下步骤:(1)臭氧催化反应器出水重力流入水解酸化配水箱或DSM来水压力流直接进入水解酸化配水箱,打开进水管道、出水管道阀门,调节配水箱进水阀使进入两座配水箱的水量基本相同,配水管出水均匀;(2)待水位淹没填料层污泥床后,开启罗茨鼓风机进行曝气,调节每组解酸化池曝气调节阀门调控其曝气量大小基本相同且曝气水均匀,溶解氧量0.5——1之间;(3)水解酸化池出水通过出水堰流入混合池,混合池内水通过导流洞流入中和池,投加氢氧化钠调PH中性,中和池水漫过玻璃钢隔断溢流入混凝池,同时开启...
还没有人留言评论。发表了对其他浏览者有用的留言会获得科技券。