The utility model discloses a PVC drainage pipe connector, which comprises a main body, a sealing groove, a sealing ring, a fastening piece, a fastening groove, a rubber film, an external thread, a fastening nut, a skid proof point, an inner thread and a check nut. The main body is set up with a sealing groove, and the seal groove is arranged with a dense sealing ring, and the fastening piece is connected with the main body. The fastening groove is evenly arranged around the fastener, the fastening piece is covered with a rubber film, and the external thread is set outside the fastening piece. The fastening piece is matched with the fastening nut, and the fastening nut is arranged on the skid convex point, and the fastening piece is matched with the check nut. The utility model has the advantages that the utility model can be installed quickly in use, the utility model is simple in structure, convenient to use on the pipe, and makes the whole pipe system more firm, more stable, convenient to install and locate, easy to disassemble and install, and a unique sealing device, so as to ensure the sealing performance of the pipe.
【技术实现步骤摘要】
一种PVC排水管道连接件
本技术涉及管道连接件,更确切地说,是一种PVC排水管道连接件。
技术介绍
管子、管子联接件、阀门和设备上的进出接管间的联接方法,由气体的性质、压力和温度以及管子的材质、尺寸和安装场所等因素决定,主要有焊接联接、承插联接、法兰联接和螺纹联接等四种方法。焊接联接的强度和密封性最好,适用于各种管道,省工省料,但拆卸时必须切断管子和管子联接件。焊接连接:气体管道安装要求实验室的气体供应不同于一般工厂的要求,首先表现在仪器设备对气体的纯度要求较高,一般工作气体要求达99.999%以上,其次气体的供应必须连续,输出压力平稳,气体的压力波动可能导致仪器设备无法正常工作,气体的不连续供应甚至可能导致仪器设备故障,因此实验室气体管路的设计必须非常严格。承插连接:主要用于铸铁管、混凝土管、陶土管及其联接件之间的联接,只适用于在低压常温条件下工作的给水、排水和煤气管道。联接时,一般在承插口的槽内先填入麻丝、棉线或石棉绳,然后再石棉水泥或铅等材料填实,还可在承插口内填入橡胶密封环,使其具有较好的柔性,容许管子有少量的移动。螺纹联接:主要适用于小直径管道。联接时,一般要在螺纹联接部分缠上氟塑料密封带,或涂上厚漆、绕上麻丝等密封材料,以防止泄漏。在1.6兆帕以上压力时,一般在管子端面加垫片密封。接方法简单,可以拆卸重装,但须在管道的适当地方安装活接头,以便于拆装。现有的PVC排水管道连接件,由于结构简单,功能单一,在传统连接方式上不能够很好的保证管道的密封性,经常出现泄漏,影响了管道的正常运作,且现在多数PVC管掩埋在底下,出现泄漏维修困难,施工难度大,连接 ...
【技术保护点】
一种PVC排水管道连接件,包括主体(1)、密封槽(2)、密封圈(3)、紧固片(4)、紧固槽(5)、橡胶膜(6)、外螺纹(7)、紧固螺母(8)、防滑凸点(9)、内螺纹(10)和止回螺母(11),所述主体(1)设置密封槽(2),所述密封槽(2)设置密封圈(3),所述紧固片(4)与主体(1)连接,所述紧固槽(5)均匀设置在紧固片(4)周围,所述紧固片(4)内包覆橡胶膜(6),所述紧固片(4)外设置外螺纹(7),紧固片(4)与紧固螺母(8)相匹配,紧固螺母(8)上设置防滑凸点(9),紧固片(4)与止回螺母(11)相匹配。
【技术特征摘要】
1.一种PVC排水管道连接件,包括主体(1)、密封槽(2)、密封圈(3)、紧固片(4)、紧固槽(5)、橡胶膜(6)、外螺纹(7)、紧固螺母(8)、防滑凸点(9)、内螺纹(10)和止回螺母(11),所述主体(1)设置密封槽(2),所述密封槽(2)设置密封圈(3),所述紧固片(4)与主体(1)连接,所述紧固槽(5)均匀设置在紧固片(4)周围,所述紧固片(4)内包覆橡胶膜(6),所述紧固片(4)外设置外螺纹(7),紧固片(4)与紧固螺母(8)相匹配,紧固螺母(8)上设置防滑凸点(9),紧固片(4)与止回螺母(11)相匹...
【专利技术属性】
技术研发人员:杨国涛,
申请(专利权)人:广东中讯通讯设备实业有限公司,
类型:新型
国别省市:广东,44
还没有人留言评论。发表了对其他浏览者有用的留言会获得科技券。