The invention discloses a spectrum allocation method based on a sub band virtual concatenation technology in an elastic optical network. The method based on optical network topology, calculate and choose the shortest path and the shortest path was selected as the optimum modulation basis and sub band virtual concatenation technology, the service request frequency gap the required number of evenly distributed to the shortest path and the shortest path of the two path transmission. With the traditional optical network with a single modulation mode, distribution of all adjacent sub bands and compared along the same path, combined with a variety of modulation and virtual concatenation technology can improve the utilization rate of the cyber source to a great extent, thereby reducing the total business blocking rate. The invention solves the problem of using the multiple modulation mode to further reduce the blocking rate on the basis of the technology of the sub band virtual cascade.
【技术实现步骤摘要】
本专利技术涉及弹性光网络中的基于子频带虚拟级联技术的频谱分配方法,属于光通信和光网络
技术介绍
传统的波分复用(WavelengthDivisionMultiplexing,WDM)光网络遵循ITU-T的固定频率栅格标准,存在网络频谱资源配置不灵活、能耗高等问题,难以适应互联网中快速变化的海量信息传输。灵活栅格弹性光网络(Flex-gridOpticalNetwork)具有频率栅格粒度更小、支持光通道频谱部分重叠等优势,避免了建立光路时分配固定频谱而造成的资源浪费,极大地提高了频谱资源的利用率,从而成为极具潜力的下一代光传送网络。在基于CO-OFDM弹性光网络中,光通道由多个CO-OFDM子频带(Sub-Band)构成,而每个子频带又包含多个子载波。为了更好地提高网络资源利用率,可以参照SDH/MSTP网络中的虚拟级联(VirtualConcatenation,VCAT)技术,即将一个通道的带宽拆分为多个虚拟容器(VirtualContainer,VC),并使虚拟容器分别沿着不同的路径进行传输,最后在接收端再重新组合。在CO-OFDM光网络中的子频带与SDH/MSTP光网络中的虚拟容器(VC)类似。因此,可以将时域的虚拟级联技术应用到频域的CO-OFDM光通道中,称之为CO-OFDM子频带虚拟级联技术。[Kozicki,B.;Opticalpathaggregationfor1-Tb/stransmissioninsp ...
【技术保护点】
弹性光网络中的基于子频带虚拟级联技术的频谱分配方法,其特征包括以下步骤:步骤1:当客户端业务连接请求到达时,首先计算出从源节点到目的节点的最短路径和次最短路径,且该两条路径无重合链路;步骤2:针对计算出的两条路径,结合根据次最短路径的长度选出最佳的调制方式;步骤3:根据业务请求速率和最佳调制方式计算出所需频隙数,将总频隙数均匀分配到两条传输路径中;步骤4:判断这两条传输路径是否同时有满足连续可用频隙数的频隙,如果有,执行步骤5,否则阻塞;步骤5:从最低标号开始选择连续可用频隙,建立光路。
【技术特征摘要】
1.弹性光网络中的基于子频带虚拟级联技术的频谱分配方法,其特征包括以下步骤:
步骤1:当客户端业务连接请求到达时,首先计算出从源节点到目的节点的最短路径和
次最短路径,且该两条路径无重合链路;
步骤2:针对计算出的两条路径,结合根据次最短路径的长度选出最佳的调制方式;
步骤3:根据业务请求速率和最佳调制方式计算出所需频隙数,将总频隙数均匀分配到
两条传输路径中;
步骤4:判断这两条传输路径是否同时有满足连续可用频隙数的频隙,如果有,执行步
骤5,否则阻塞;
步骤5:从...
还没有人留言评论。发表了对其他浏览者有用的留言会获得科技券。